Cars Comp

1. Inspect the outside edge of the drivers side seat in your Chevy vehicle. Look for the buttons labeled 1 and 2. If your Chevy doesnt have them, it does not have the memory seat feature.
2. Sit in the drivers-side seat and adjust the seat to fit your proportions by pushing the power-seat selector up or down to raise or lower the seat. Push it back or forth to adjust your seat-track position. If your Chevy has electronic lumbar, adjust it using the side lumbar control. as well, which will also be saved into your memory seating position.
3. Press and hold the 1 button. Youll hear a chime in about five seconds notifying you that the memory seat is programmed to the current position.
4. Repeat the process for memory position 2. To recall either position, simply press the 1 or 2 button when you enter the car. The seat will automatically adjust to the programmed position.

1. Press back on the seat position switch to maneuver the seat backward as far as it will go. Locate the plastic caps on the front of the metal seat rails on the floor. Using a flathead screwdriver, gently pry the caps off to gain access to the bolts.
2. Unbolt the forward-most bolts using a socket wrench. Place the bolts in a safe location. Using the seat position switch, move the seat forward as far as possible, making the rear bolts visible. Repeat this process to remove them as well.
3. Reach under the seat and unplug the wiring connector from the power seat control module. Unplug the cable from the heating element if your CLK 320 is equipped with heated seats.
4. Remove the seat from the vehicle. Repeat this process on the other side to remove the second seat. When finished, place the seats back in the car, reconnect the wiring and securely reinstall the bolts and caps.